Toyota Highlander Maintenance Light Turn Off

Toyota highlander oil light reset procedure for model years 2003 2015. Many toyota highlander models are equipped with maintenance reminder systems that alert the driver when regular maintenance should be done.

2015 Toyota Highlander Xle By Awd Cruise Control Shut Off On

How To Reset The Maintenance Light On A 2007 Toyota Highlander

Toyota Highlander Dashboard Light Guide Ron Hibbard Toyota

Sit inside the highlander and close the door.

Toyota highlander maintenance light turn off. Turn the vehicle completely off. Follow these steps to reset the indicator light. If toyota service or the quick lube place forget to reset you oil light maintenance required light on your toyota highlander this simple procedure will help you reset the car yourself.

Continue to hold down the trip odometer reset button until 000000 miles appears on the display and the maintenance light turns off. The entire process can be completed in about a minute. Turn the ignition to run one position before starting engine.

With the vehicle running press and hold the trip button or display change button to switch the display to trip a. The maintenance required light should be off and the computer will now begin accumulating miles from zero. Push and hold the trip reset or mode button.

While holding reset button switch ignition to on position. When the oil is changed by a toyota dealer the light should get reset as part of the process. Reset the maintenance required light in a toyota after you change your oil so you know when to do your next oil change.

When the light comes on after blinking for one minute. The engine should be turned off. With vehicle ignition switched to on position make sure odometer is showing tripmeter a then turn the ignition switch to off position.

Turn the ignition off. To reset the 2016 toyota highlander maintenance light after an oil change please follow these instructions. This process works on most toyotas in.

Press and hold the trip odometer reset button and turn the ignition switch to the on position if your car has start push button press the start twice without touching the brake pedal. In case the light does not turn off even if the tire inflation pressure is adjusted have the system checked by your toyota dealer. Resetting the maintenance light on a toyota highlander is a fairly simple process that only requires you to press a few buttons.

Go to step 3 vehicles with smart key system 1. The light will turn off after a few minutes. Ensure trip metre a reading is shown.

Once it reaches 5000 miles again the maintenance required light will turn on again. Oil changes are the most common reason for the maintenance reminder to illuminate. Adjust the tire inflation pressure including the full size spare tire to the specified level.

Vehicles without smart key system 1. Like many other toyota vehicles the process to reset the oil change maintenance required light on the toyota highlander is much the same.